Home   Product range   Technical information   Fitting directions   Testimonials   Free Quotation & Advice   Contact us	0116 251 8811 info@3aTechnologies.co.uk   Technical information         EZLAY Technical Information           The EZLAY tiles and ramps are injection moulded PVC products of which approx 50% is recycled. The floor tiles have 48 dovetail joints on the four external edges that have been designed to interlock together to create a tough and flexible floor covering. Thicknesses 5mm, 7mm and 10mm Tile Dimensions 500mm x 500mm Floor Area Covered Per Tile 490mm x 490mm Floor Area Covered Per 4 Tiles 0.96m2 Weight EZLAY 7, ESD and ERGO: 8.3kg/m2 EZLAY 5: 6.5kg/m² EZLAY 10HD: 12.5kg/m² Hardness Range 78 Shore A – 98 Shore A Surface Texture EZLAY 5:                   Embossed EZLAY 7:                   Raised Disk, Flat or Embossed EZLAY 10 HD:          Raised Disk, Embossed EZLAY Ergo:             Raised Disk EZLAY ESD:             Embossed Lifecycle The anticipated life cycle of the EZLAY range is in excess of 25 years and as the tiles can be easily replaced if damaged or worn, they offers a significantly lower cost alternative to floor coverings that need to be bonded to the substrate. Guarantee All EZLAY products are guaranteed to be free from manufacturing defects for 5 years from installation date. Chemical Resistance PVC is resistant to most commonly used chemicals and hydrocarbons however caution is advised if Ketone solvents are in use in the area proposed for fitting EZLAY tiles. Slip Resistance BS6677 Part 1:1986 > 35L Low risk of slipping. UK Slip resistance guidelines: R10: DIN51130 Fire Test / Combustibility BS 476: 7 Class 1 Thermal Insulation   Heat savings up to 0.04K ca/m2/u/co Acoustic Insulation Noise reduction of up to 46 db EZLAY ESD is a static dissipative (conductive) flooring system which is anti-static.  Static dissipative means the resistance to ground is less than 10^9ohms (1Gohm).  These performance figures ensure that the floor complies with BS EN61340-5-1:2001 and IEC61340-4-1.  The maximum test voltage allowed for measuring ESD flooring to these standards is 100 volts. Test results Resistance to ground of the floor / footwear combination: (Rg) > 7.5 x 10^5 Ohms and <3.5 x 10^7 Ohms Anti- static performance: 3.6 x 10^5 < Rs <3.4 x 10^5 Conductive performance: 3.6 x 10^5 < Rg <9.5 x 10^5 Resistance to hot objects / Solder: Good All test carried out independently by the University of Köln (Germany). EZLAY - Ramps Thickness 7mm (10mm) > 1mm Ramp Dimensions 500mm x 140mm Floor Area Covered By Connected Ramps 500mm x 130mm