|
 |
| |
 |
0116 251 8811 |
 |
info@3aTechnologies.co.uk |
|
|
|
| |
Easy Puller 50
A mobile universal 50 tons puller with a hydraulic lifting system for easy positioning. |
|
| |
| |
|
|
 |
|
• Effiecient; one man can do the job.
• Ergonomic: No manual adjustment necessary.
• Manufactured according to the latest CE regulations.
• Big reach: from 65 to 1150mm!
• 50 ton Hydraulic double-acting cylinder.
• Hydraulically vertical lift system.
• Hydraulically-actuated self-centring jaws, by one push on the button the puller jaws will automatically grip behind the part.
• Only one remote control for the different handlings.
• Puller can be assembled in 2- or 3 jaw configuration.
• Safety; the puller is delivered with a special safety blanket and safety instructions.
• The lifting brackets allows the puller to be lifted in a crane.
• Robust castors makes it easely movable.
| Voltage |
|
230/460V |
| Frequency |
|
50/60Hz |
| Power |
|
|
| Weight heater |
|
460 |
| Dimensions heater lxbxh |
|
315x930x1276 |
| Temp. mode |
|
°C |
| Time mode |
|
|
| Induction yokes |
|
|
| Max.diam. work piece |
|
1150mm |
| Max. width Work piece |
|
651mm |
| Max.weight Work piece |
|
|
| |
|
|
|
|
|
| |
Easypuller 100
The Easypuller 100 is a easy movable heave duty hydraulic puller. |
|
| |
| |
|
|
 |
|
The Easypuller 100 is a easy movable heave duty hydraulic puller. Adjusting screw allows operator to move vertical position of the pullers. Optional is an electrical adjusting system.
| Voltage |
|
230-460V |
| Frequency |
|
50/60Hz |
| Power |
|
|
| Weight heater |
|
486 Kg |
| Dimensions heater lxbxh |
|
3015x930x1276 |
| Temp. mode |
|
°C |
| Time mode |
|
|
| Induction yokes |
|
|
| Max.diam. work piece |
|
1219mm |
| Max. width Work piece |
|
1066mm |
| Max.weight Work piece |
|
| |
|
|
|
|
| |
|
|
| |
Fitting Tool
The TM fitting tool set for a save , precise and quick mechanical mounting of bearings , sealing rings and pulleys. |
|
| |
| |
|
|
 |
|
For safe, precise and quick mounting of bearings, bushings, sealing rings and pulleys. This set is usable for fitting more than 230 sizes of bearings with a bore from 10 to 50mm. The set consist of three special aluminium impact sleeves, 33 synthetic impact-resistant collets and a dead blow hammer, delivered in a robust plastic case. The relief on the tubes realizes a perfect grip.
For bearings, it is important that during mechanical mounting, the bearing is supported on its inner- and outer ring to avoid unnecessary damage. In this way mounting forces are not transmitted via balls or rollers of the bearing. Through the use of impact resistant synthetic collets metal to metal contact is avoided. |
| |
|
|
|
|
| |
|
|
|
| |
|
